Name | Aluminum acetylacetonate |
Synonyms | Acetyl Acetonate Aluminum acetylacetonate Aluminium acetylacetonate Aluminum 2,4-pentanedionate Aluminium 2,4-pentanedionate aluminumtris(acetylacetonate) Tris(acetylacetonato)aluminum tris(2,4-pentanedione)aluminum Aluminum iii 2,4-pentanedionate Tris(2,4-pentanedionato)aluminum tris(2,4-pentanedionato)-aluminu tris(acetylacetonate)aluminum(iii Tris(acetylacetonato)aluminium(III) Tris(acetylacetonato) aluminium(III) tris(pentane-2,4-dionato-O,O)aluminium Tris(2,4-pentanedionato)aluminium(III) aluminum tris[(2Z)-4-oxopent-2-en-2-olate] tris(2,4-pentanedionato-O,O')-,(OC-6-11)-Aluminum |
CAS | 13963-57-0 |
EINECS | 237-741-6 |
InChI | InChI=1/3C5H8O2.Al/c3*1-4(6)3-5(2)7;/h3*3,6H,1-2H3;/q;;;+3/p-3/b3*4-3- |
InChIKey | KILURZWTCGSYRE-LNTINUHCSA-K |
Molecular Formula | C15H21AlO6 |
Molar Mass | 324.31 |
Density | 1,27 g/cm3 |
Melting Point | 190-193°C(lit.) |
Boling Point | 315°C(lit.) |
Flash Point | 314-316°C |
Water Solubility | 2.5 g/L (20 ºC) |
Solubility | 3g/l |
Vapor Presure | 0Pa at 25℃ |
Appearance | White powder |
Specific Gravity | 1.279 |
Color | White to cream |
BRN | 4157942 |
PH | 8 (3g/l, H2O, 20℃) |
Storage Condition | Store below +30°C. |
Stability | Stable. Incompatible with strong oxidizing agents. |
Sensitive | 4: no reaction with water under neutral conditions |
MDL | MFCD00000013 |
Physical and Chemical Properties | Triacetylacetonate aluminum is a white crystalline powder, insoluble in petroleum ether. Solubility at 25 ° C: water. 00, methanol 1.8, toluene 14.6, benzene 35.4, also soluble in chloroform, ethanol and ether. Toxicity LD50(mg/kg): Rat oral 1000. UN34676.1/PG2, specific gravity: 1,27g/cm3 |
Use | Used as an intermediate in organic synthesis |
Hazard Symbols | T - Toxic |
Risk Codes | R25 - Toxic if swallowed R36/37/38 - Irritating to eyes, respiratory system and skin. R36 - Irritating to the eyes R43 - May cause sensitization by skin contact |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S28A - S36/37 - Wear suitable protective clothing and gloves. |
UN IDs | UN 3467 6.1/PG 2 |
WGK Germany | 3 |
RTECS | BD2230000 |
TSCA | Yes |
HS Code | 29420000 |
Hazard Class | 6.1 |
Packing Group | III |
Toxicity | LD50 orally in Rabbit: 48.7 mg/kg |
Raw Materials | Aluminum 2,4-Pentanedione |
LogP | -1.67 at 25℃ |
NIST chemical information | Information provided by: webbook.nist.gov (external link) |
EPA chemical information | Information provided by: ofmpub.epa.gov (external link) |
use | used as an intermediate in organic synthesis because this product is soluble in organic solvents, stable to heat and difficult to hydrolyze, it can be used as a resin crosslinking agent; curing agent for acrylic adhesive and curing agent for epoxy resin adhesive; catalyst for olefin polymerization. Catalyst. Crosslinking agent. Aluminum triacetylacetonate is mainly used as a hardening accelerator for epoxy resin. Crosslinking agent for phenol, silicone and acrylic resin. Improve the performance of polymer materials such as inks, coatings, glues, and resins through chemical chelation. Usage: It is used in solvent-based acrylic acid, epoxy, polyester, polyurethane pressure-sensitive adhesive for curing and crosslinking. It does not contain-OH,-COOH,-NH2, etc. It must be pretreated. The addition amount is 1.5-2‰ (the specific amount should be determined after the experiment). After the product synthesis is completed, the diluted aluminum acetylacetonate can be added at the temperature below 70 ℃ and stirred for a few minutes. |
production method | 1. dissolve 6g(0.06mol) of newly distilled acetylacetone in 40mL of water, stir and drop 6mol/L ammonia water until acetylacetone is dissolved. Dissolve 6g(0.0093mol) aluminum sulfate [Al2(SO4) 3.17H2O] in 60mL of water, and add this solution to acetylacetonate ammonia solution to generate precipitation. The pH of the control solution in the reaction is neutral. Filtering, washing, natural drying. Dissolve the crude product with a small amount of benzene, filter, and slowly add petroleum ether to the filtrate to make it precipitate. Filtration, washing with petroleum ether, natural drying, 4.2g product, 81% yield. If necessary, it can be purified by sublimation. 2. Aluminum acetylacetonate prepared from the reaction of commercially available anhydrous AlCl3 and acetylacetone in chloroform solution contains iron that is difficult to remove. The commonly used method is to use aluminum hydroxide, aluminum acetylacetonate coated from analytically pure aluminum hydroxide with very little iron content, and recrystallize multiple times in petroleum ether to obtain pure aluminum acetylacetonate. |
spontaneous combustion temperature | 500°C |